Pneumex PneuWalker, Assembly Manual, Page: 10 / 28

10
Control Panel
Before putting a patient in the PneuWalker™ you should famil ‐
iarize yourself with the Control Panel located between the up ‐
rights.
When to use Exercise or Balance Mode
Exercise Mode
Exercise mode lets the user perform vertical movements with con ‐
sistent unweighting . For example: when you are retraining the sit
to stand motion, or working on stepping up and down steps.
Balance Mode
Balance mode lets the user perform exercises involving less ver ‐
tical movement without fear of falling. The system supports the
entire body weight during loss of balance, allowing a fall of no
more than three to six inches
.
OFF
OFF mode releases the air from the system quickly. This mode can
be used to re
‐ weight a person quickly if desired.
Pressure gauge Regulator knob Mode selector
Indicates the number of
pounds/kilograms the
system is Unweighting Gradually increases (+) or
decreases (
‐ ) the amount
of Unweighting lift)
Provides choices of
Exercise, Balance, or
O
ff (OFF ‐ EX ‐ BAL