Mounting
Once you have attached all cables needed to the
vehicle dock, attach the mounting/interface
plate to whatever mounting infrastructure you
are using, and then attach the dock using the 4
supplied 10-24 UNC screws as shown
The standard mounting/interface plate that
comes with the PMT TrimLine V series vehicle
docks features industry standard mounting
bolt patterns. This allows easy mounting to
many pre-existing mounts as well as
dedicated mounts from PMT
For more info visit:
www.precisionmounts.com
Or call us at 1-888-869-7652
Recommended Accessories
Our “Guide Plate” (part# 70.V100.014-1) optional accessory is great for use in environments
where greater stress is placed on the docking connector due to rough handling, or awkward
installations such as vertical walls. The plate works by adding additional locating surfaces that
prevent mis-alignment and damaged dock connectors when inserting the laptop into the dock.
Contact us to learn more, and to inquire about any of our additional accessories.