Wiring/Cable Management
Securely connect required cables to
matching ports, and use tie straps to
secure cables to a suitable location on
the dock to prevent cable strain
Cables shown tie strapped and
attached to universal mounting plate
for the V series vehicle docks
Once the cables are secured to the dock,
run the cables away from anywhere where
they may interfere with operating any
vehicle controls
Wiring Tip:
PMT does not recommend relying on a
cigarette socket adaptor for powering
vehicle docks. We recommend hard wiring
using a good clean ground direct from the
vehicle battery (-) post, and (+) supply from
a fused 12v location also directly from the
vehicle battery. All Peripherals connecting
to the docking station should get power
and ground from the same location as the
dock.