Inserting the Laptop
Step 1:
Insert key and rotate the lock
90 degrees counter-clockwise
Step 2:
Pull the Release Handle towards you
until you hear a click and the lever locks
into position.
Step 3:
Position the computer front first into the
Front Clamps. (The front of the Laptop has
indents to aid in alignment)
Step 4:
Press the rear of the computer
down into the dock
Before proceeding, prep the laptop for use with the vehicle dock
Turn the laptop over and ensure the
connector cover door is fully open
Once the door is fully open, inspect the
connector for any pre-existing damage, that
could then damage the dock. Do not proceed
with docking if damage is present