When the Recorder is plugged in, the LED on the front of the Recorder will start
blinking. This indicates that the one-minute countdown to recording is in progress. At
the end of the countdown, the Recorder will begin recording information. The LED will
blink once every six seconds to indicate that the countdown is complete and the unit is
recording.
Note: If you have interrupted power to the receptacle during installation, the countdown
will not begin until the power is reapplied.
4.4 Downloading Data
After the Eagle 120 Recorder has recorded the desired data, it is downloaded into
ProVision or a Palm PDA. The Eagle 120 Recorder may be downloaded in the field by
connecting the USB cable into a laptop (see PC Communications with the eagle 120
Recorder).
The Eagle 120 Recorder stops recording when a PC is connected to the USB port and
“Identify” is selected in ProVision. The data is then downloaded into ProVision. If the
USB cable is unplugged from the Eagle 120 Recorder, the Eagle 120 Recorder will
continue recording, appending data to the existing recording session. If the Eagle 120
Recorder is re-initialized, it will start a 60-second countdown. The Palm PDA can also
download a Eagle 120 Recorder via the Blue tooth wireless communications (if the Eagle
120 has that option installed)– no cable is needed.
