5
Trigger Input
The TLE1 has a standard 12volt AC or DC (constant) external control trigger. It can be used in conjunction
with a home automation system or suitably equipped processor to automatically enable or disable the TLE1
according to mode, source or mood.
To use the trigger, the rear panel mains power switch must be “ON” and the ‘Remote Power Control’ in the
“Remote” position. The trigger input uses a standard low-voltage 2.1mm DC jack.
If Remote trigger is not required, simply leave the “Remote Power Control” in the “Local” position, and use the
mains power switch, as normal
DC or AC
4-12V
Remote Power Control
Select ‘Local’ when not using
remote power control.
Power switch must be ‘on’ when
using remote power function
Local
Remote
Mains power
switch
Fuse
Mains input
Trigger input
connector
Remote power
control switch
