background image

VTF-3 MK5 HP

Subwoofer Manual

Features

Variable Tuning Hybrid Technology.

“Now you decide how deep to play.”

The large flared ports can be re-tuned with the flip of a switch and the

addition or removal of a port plug(s). With support for five different operating modes, including ported and sealed
hybrid modes, this subwoofer offers state-of-the-art performance in virtually all rooms.

Custom built woofers.

“The end of featureless boom.”

We design our woofers from the ground up to have exceptionally flat response

and low distortion, so you will hear clean and detailed bass not found in lesser subwoofers.

Powerful BASH amplifiers.

Our custom built amplifiers have ultra-high headroom, soft clipping, subsonic filtering, adjustable Q, and
class A/B output stage to provide extremely high fidelity, low distortion, and high output.

Flexible room placement.

The luxurious and smooth non-vinyl finishes, rounded corners and edges, and front-firing woofer and ports 
allow for close placement next to listeners, in corners, and even inside built-in entertainment centers.

Connects to almost any system.

“Integration is easier than ever.”

Thanks to modern receivers that use Dolby Digital, DTS, THX, or Bass 

Management, you can connect the subwoofer to your system with one cable. If you have invested in a stereo-
only system, integration is also simple thanks to true 24 dB/Oct. low pass filters.

 

Summary of Contents for VTF-3 MK5 HP













Reviews: