background image

The lightning flash with arrowhead symbol within an equilateral triangle is intend-

ed to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

Le symbole éclair avec point de flèche à l’intérieur d’un triangle équilatéral 

est utilisé pour alerter l’utilisateur de la presence à l’intérieur du coffret de “volt-

age dangereux” non isolé d’ampleur suffisante pour constituer un risque d’éléc-

trocution.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing) instruc-

tions in the literature accompanying the product.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est employé pour 

alerter les utilisateurs de la présence d’instructions importantes pour le 

fonctionnement et l’entretien (service) dans le livret d’instruction 

accompagnant l’appareil.

Important Safety Instructions

2

NO USER SERVICEABLE

PARTS ARE INSIDE.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus 
near water.

6. Clean only with dry cloth.

7. Do not block any ventilation 
openings. Install in accordance with
the manufacturer's instructions.

10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.

11. Unplug this apparatus during 
lightning storms or when unused for 
long periods of time. 

12. Refer all servicing to qualified service
personnel.  Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped. 

13. WARNING: To reduce the risk of fire
or electric shock, this apparatus should
not be exposed to rain or moisture and
objects filled with liquids, such as vases,
should not be placed on this apparatus. 

14. To completely disconnect this 
equipment from the mains, disconnect
the power supply cord plug from the
receptacle. 

15. The mains plug of the power supply
cord shall remain readily operable. 

8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat. 

9. Do not defeat the safety purpose of 
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet. 

TABLE OF

CONTENTS

UNPACKING  . . . . . . . . . . . . . 3
PLACEMENT . . . . . . . . . . . . . 3
HOOKUP  . . . . . . . . . . . . . . . . 4
VOLUME LEVEL  . . . . . . . . . .5
CROSSOVER  . . . . . . . . . . . . 5
FINE TUNING  . . . . . . . . . . . . 5
TROUBLESHOOTING . . . . . . 7
REPAIR . . . . . . . . . . . . . . . . . .8
SPECIFICATIONS  . . . . . . . . . 9
WARRANTY  . . . . . . . . . . . . . .9

Summary of Contents for VTF-3 MK5 HP













Reviews: