Vertically
to generate both front and rear image data vertically in a joined
image (the rear image will be placed below the front image).
5. Load one page of the document and click the
Preview
button. The scanned
image should appear in the Preview Window. To define the margins and crop
out sections of the image you don’t want scanned, use the mouse to click and
drag the corners or sides of the scan area borders. Adjust the scan settings
again if the preview image is not to your liking.
6. Load all pages of the document and click the
Scan
button.
7. The scanned images are displayed in the FineReader main window, and you
may proceed OCR to convert images into pdf or editable text formats.
Information
If you usually scan images with the same
settings, you can define a scan profile to
save the settings you have configured by
entering a name or description for this new
profile in the white area beside the word
Profile
and then click the
Save
button.
Next time when you want to scan
similar documents and apply the same
settings, you can just select this profile
from the drop-down list and then click
the
Scan
button.
Scan within HotCard BizCard Finder:
1. Click on the Windows Start button, point to
Programs
>
Business card
Recognition Software
and then click
Business card Recognition Software
to launch the Business card Recognition Software.
2. Within Business card Recognition Software, click
from the main toolbar.
3. In the TWAIN window that opens, select
ADF
(Front Side)
as the Scan Type if
you want to scan single-sided business cards, or
select
ADF (Duplex)
to scan
double-sided business cards.
4. Adjust the scanning settings (Paper Size: Automatic Size, Resolution: 300). For
ADF (Duplex)
scan, you can tailor settings individually for front and rear sides
of the business cards. Click
Front Side
button to adjust the scanning settings
of front side and then click
Rear
Side
button to adjust the scanning settings of
rear side.
You can enable the function of
Merge Pages
only when you select
ADF
(Duplex)
as
Scan type
and
Automatic Size
as
Page Size
to output the scan
images of both front and rear sides in one image. After the function of
Merge
Pages
is enabled, you can make the selection of
Horizontally
to generate both
front and rear image data horizontally in a joined image (the rear image will be
placed at the right side next to the front image), or
make the selection of
Vertically
to generate both front and rear image data vertically in a joined
image (the rear image will be placed below the front image).
24
Summary of Contents for SMARTOFFICE PS282
Page 1: ...Installation Usage Maintenance ...
Page 4: ...CONTACTING PLUSTEK 40 ...
