15
4. Adjust the scanning settings. For
Sheet Feeder (Duplex)
scan, you can tailor
settings individually for front and rear sides of the documents. Click
Front Side
button to adjust the scanning settings of document front side and then click
Rear
Side
button to adjust the scanning settings of document rear side.
You can enable the function of
Merge Pages
only when you select
Sheet
Feeder (Duplex)
as
Scan type
and
Automatic Size
as
Page Size
to output
the scan images of both front and rear sides in one image. After the function of
Merge Pages
is enabled, you can make the selection of
Horizontally
to
generate both front and rear image data horizontally in a joined image (the rear
image will be placed at the right side next to the front image), or
make the
selection of
Vertically
to generate both front and rear image data vertically in a
joined image (the rear image will be placed below the front image).
5. Load one page of the document and click the
Preview
button. The scanned
image should appear in the Preview Window. To define the margins and crop
out sections of the image you don’t want scanned, use the mouse to click and
drag the corners or sides of the scan area borders. Adjust the scan settings
again if the preview image doesn’t satisfy your needs.
6. Load one page of the document and click the
Scan
button.
7. When the scan finishes, click the
Exit
button to close the TWAIN window. The
scanned images are displayed in your TWAIN compatible program, and you
may perform the image editing tasks.
Click the
Help
button within the TWAIN window for more information about the
settings.
Scanning from the Scanner’s Panel or On-screen DocAction's
Execute Menu
The settings for the button on the scanner’s panel are configured through
DocAction. DocAction offers you quick access to the most frequently-used scanning
functions. They are especially useful when you need to repeatedly scan with the same
settings and send images to the same destination.
The button on the scanner panel will be used in this guide to demonstrate the
scanner operations. You may also use DocAction's on-screen Execute menu to
perform the same scanning tasks.
Configure Button Settings
Before performing your first scan via scanner buttons, you are recommended to
configure the button settings to your needs and preferences first. There are two ways
to configure or view the button settings of DocAction:
Double-click the icon
in the Windows system tray.
