Page 20/68
3.5 Checking and documenting measurement results
Screen size is limited and therefore measurement results are presented on two (plusoptiX
A12R), three screens (plusoptiX A12C) respectively, for better readability. These three
measurement result screens are:
Check measurement results screen
Review video screen
Review database entries screen (nur plusoptiX A12C)
Note
:
To exit these three measurement result screens, i.e. to return to the Start screen
and to perform another measurement, you have to press the Shutter.
Touch orange arrows (1) and (2) located in Navigation bar to toggle in between measurement
result screens. An orange dot in between the arrows (1) and (2) indicates which of the two,
three respectively, measurement result screens is displayed.
If a anonymous measurement was performed, the measuring report can be saved manually by
touching the printer button (3).
After touching the printer button (3) the patient data entry screen is displayed by plusoptiX
A12C (see chapter 3.3
“Entering patient data (only plusoptiX A12C)”). PlusoptiX A12R
displays a input field instead. The filled in data are saved by touching the green checkmark (4).
PlusoptiX A12C saves the filled in data in the patient database, too.
1)
2)
3)
4)
Check measurement results screen
Review video screen
Review database entries screen
(only plusoptiX A12C)
Figure 11: Overview of measurement result pages