Plum eSTER x80, Installation And Operating Manual, Page: 4 / 20

4
1. Recommendations regarding safety
The following requirements shall be complied
with.
 The device should be used as intended,
keeping it in a dry environment, and
installing it only indoors.
 Before connecting the radio module to
the main controller, absolutely stop the
operation of the main controller by
switching it off and disconnecting it from
the main power supply.
 Non-compliant with the manual or
incorrect connection of the radio module
to the main controller may be a source of
malfunction of the main controller and
the radio module itself.
 The device should only be started up by a
person who is familiar with these
instructions.
 Under no circumstances may the device
construction be modified.
2. General information
The wireless room panel is designed for
wireless cooperation with external radio
transmission module, which is wired to the
main controller. The room panel is installed
in a selected room, e.g. a living room, and is
designed to maintain a preset room
temperature by sending a radio signal to a
module connected to the main controller. The
implemented encrypted, two-way radio
communication allows the transmission of
information from the main controller to the
room panel, so the room panel itself acts as
an additional screen for servicing all
parameters of the main controller.
Radio communication: 1 – eSTER_x80 wireless
room panel, 2 – ISM_xSMART radio module, 3 -
main controller.
Wireless room panel can be used in a
household or similar environments and in
slightly industrialized buildings.
3. Applied symbols
In this manual the following graphic symbols
are used:
- the symbol indicates additional
advice and information.
- the symbol indicates important
information.
Caution: the symbols indicate important
information, in order to make the manual
more user friendly. Yet, this does not exempt
the user from the obligation to comply with
requirements which are not marked with a
graphic symbol.
4. Information about documentation
The wireless room panel manual is a
supplement for the main controller manual.
In particular, except for this manual, the
main controller manual should also be
followed. Manufacturer is not responsible for
any damages caused by failure to following
these instructions.
5. Storage of documentation
This assembly and operation manual, as well
as any other applicable documentation,
should be stored diligently, so that it is
available at any time. In the case of removal
or sale of the device, the attached
documentation should be handed over to the
new user.
6. Declaration of Conformity
The purchased product meets the
requirements of Directive 2014/53/EU of
the European Parliament and of the
Council of 16 April 2014 on the
harmonization of the laws of the Member
States concerning making available on the
market of radio equipment and does not
cause harmful interference with radio
communications to other equipment, in a
residential area, provided that the product is
correctly installed and used in accordance
with the requirements of this manual.
7. Directive WEEE 2012/19/UE
Purchased product is designed and made of
materials of highest quality.
The product meets the requirements of the
Directive 2012/19/EU of 4 July 2012 on