-
18
-
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands, although the SAR
is determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the maximum
value, in general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a new model phone is a available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the
exposure limit established by the FCC, Tests for each phone are
performed in positions and locations (e.g. at the ear and worn on the
body)as required by the FCC.
For body worn operation, this model phone has been tested and
meets the FCC RF exposure guidelines when used with an
accessory designated for this product or when used with an
accessory that Contains no metal and that positions the handset a
minimum of 1.0 cm from the body.
Non-compliance with the above restrictions may result in violation of
RF exposure guidelines.
Summary of Contents for STAR
Page 1: ... 1 STAR ...
Page 3: ... 3 Phone Overview ...
