OCP (SMD) Build guide (v1.0), 04/07/2022
PLUS?
OCP is slightly different from other Ornament and Crime versions, a few
improvements
are added to OCP:
VOR
– V
ariable
O
utputs
R
ange make it easy to select different offsets for the outputs
(Unipolar 0-10v, B/-5v and Asymmetric -3v to 7v), with the official firmware the
module automatically chooses the best offset for each application and you can always
change it with the dedicated VOR button.
Extended Range
–
OCP
outputs can deliver 10 volts peak to peak when VOR is
activated.
Front USB Input
–
Can be used for easily accessing - MIDI to CV / CV to MIDI
functions of the Hemisphere firmware (Captain MIDI).
Atenuverters
–
With the 4 knobs you can scale and invert any modulation source you
plugged to the CV inputs, when nothing is plugged in, those knobs are connected to an
internal voltage source and can control many parameters of each application.
There are several steps in the assembly process:
1. Back side assembly
2. Front side assembly (UI parts)
3. Firmware Installation and Calibration
You will need those tools for the assembly process:
1. Soldering Iron and high quality soldering wire
2. DMM - Multimeter
3. Cutter
4. Paper masking tape
5. USB cable (Type A to micro USB Type B)
– Note that you are using a cable that
is capable of transmitting data.
6. Computer with free USB port for Firmware installation.
