18
BIA AeroFresh Plus
5.2.5.
"Count" programme
In the
Coun
programme the operating hours of the humidi-
fier can be displayed
Repeatedly press MODE button until the display shows
Coun
. The alternating display shows
Coun
and the value.
5.2.6.
"Reset" programme
In the
rSt
programme all functions can be reset to factory
settings.
1. Repeatedly press MODE button until the display shows
rSt
.
2. Press SET button.
All settings are reset.
5.2.7.
"Information" programme
In the programme
inFo
the software version is displayed.
Repeatedly press MODE button until the display shows inFo.
The alternating display shows
inFo
and the software ver-
sion.
The unit requires regular cleaning and maintenance.
The operating time of the steam cylinder can thus be pro-
longed.
The operating time of the steam cylinder depends on the
service time of the unit and the hardness of the water.
6.1. REGULAR MAINTENANCE WORK
•
Check all installed hoses and pipes for leakages.
•
Check all hoses and pipes for damages, bends etc. and
replace if necessary.
•
Check all hose clamps and tighten with screws if neces-
sary.
•
Check the correct functioning of the entire unit.
6. MAINTENANCE (USER)
Warning:
Disconnect all poles of the humidifier from the
power supply system, close the water supply and
let the steam cylinder cool down prior to all mainte-
nance work. Injury or damage may otherwise
result.
Note:
Pluggit recommends that you record the regular main-
tenance work.
