PLS HVR 505, Operating Manual

Page: 4 / 80

SAFETY INSTRUCTIONS
Laser Safety
The PLS HVR 505 R is a class II laser
according to 21CFR1040. The PLS HVR
505 G is a Class IIIA laser. Follow the
instructions on the warning labels which are
shown in the following illustrations:
PLS HVR 505 R
Laser Power:
635 nm
<1mW
Laser Class ll
Do not remove the attached warning labels.
The manufacturer and its dealers are not
liable for any defects and the consequences
from this removal.
! Attention ! The internal laser sources
comply with with laser classes II and IIIA.
Do not disassemble the instrument. In
case of inappropriate repairs, laser radiation
may arise in excess amounts of the marked
labels and liability may be incurred if there
is damage. In cases of inappropriate
processing, malfunctions are possible
without external visible damage.
The unit charger should only be used
indoors.
DO NOT ATTEMPT TO CHARGE
STANDARD ALKALINE BATTERIES.
Attention: This instrument contains
nickel cadmium batteries. Nickel cadmium
batteries must be recycled or disposed of
properly. WEEE-Reg.: DE23874031
2
C A U T I O N
LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
MAX OUTPUT POWER <1mW
WAVELENGTH 635-670nm
CLASS II LASER PRODUCT
D A N G E R
LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
MAX OUTPUT POWER <1mW
WAVELENGTH 635-670nm
CLASS III A LASER PRODUCT
PLS HVR 505 G
Laser Power:
532 nm
<5mW
Laser Class lllA