17
GANG ASSEMBLY
(Above) Non-Greasable Sealed Bearings are used on both
front and rear gang assemblies. These increase longer life
and dependable use of your unit for years to come.
(Above) The Front Gang Assembly has (4) positions
that the Gang Assembly can be adjusted. The Front
Pin Hole (Shown Above) is the least aggressive and
each pin hole moving back will put the gang assembly
into more aggressive positions.
(Above) The Rear “V” Shaped Gang Assembly has a
fixed position and is set at a pre-determined angle for
maximum tillage. The rear disk can also be used to
place soil on top of seed. Depending on travel speed
and top link adjustment the soil disturbance can help
the dirt flow on top of the seed.
(Above) Side view of unit showing the front gang
assembly set to throw tilled dirt outward and the rear
gang assembly set for additional tillage and for pulling
the tilled dirt from the front gang assembly inward,
thus creating an optimal seed bed.
