10
DETAILS ABOUT YOUR PLOTMASTER™
HUNTER SERIES 800
The Mainframe and its attachments are made of heavy gauge steel
components. (Drag, Cultipacker Roller, Seeder Assembly).
(refer to the diagram on page 8 to locate each of the below listed)
(A. Cultipacker Roller)
The roller is designed for compaction of the soil over the seed for greater germination of
what has been planted. The roller can also be used for added weight during tillage.
(B. Leverage Tool)
The Leverage Bar is used to aid in folding and unfolding the Cultipacker Roller. The (2)
studs on the Leverage Bar can be used to lock the Roller to the Drag Bar when in the
folded position. Use designated holes for desired use.
(C. Drag Bar w/Metal Grating)
The Drag bar and/or Metal grating is used for either leveling uneven areas or for
covering larger seed such as beans, peas, oats and rye that require more soil coverage to
germinate. The Drag Bar can be used with or without using the Metal Grating.
(D. Disconnect for Drag/Cultipacker)
These Bent pins can be removed to disconnect the Drag/Cultipaker Components from the
unit if the user wishes to do tillage only without dragging or rolling the area tilled.
(
E. Seeder Motor’s w/Cover)
(PT# SA-29-2823)
The Electric Seeder Motor’s are activated by the in-line ON/OFF switch. These motors (1
per seeder assembly) drive the spiral brush that dispenses the seed.
(Versa Seeder)
(F. Seed Flow Control Handle)
The Seed Control Handles allow you to adjust the rate of seed dispensed depending upon
the size seed you are planting. The 0-10 Scale helps in determining the diameter of the
opening. Smaller seed will be the low end, 0-2, and Larger seed will be the high end, 3-10.
(
G. -R/L- Electric Seeder Assembly)
The Seeder is where your seed is dispensed from;
The H-600 maximum capacity is 50# of seed per Seeder Box. (100# total)
The H-800 maximum capacity is 60# of seed per Seeder Box. (120# total)
