16
CULTIPACKER ASSEMBLY
(Above) Cultipacker Stop on Main Frame
(Above) Pillow Block Bearing Set Screw
needs to be tighten after initial use. Make
periodic checks thereafter
(Above) Hard Rubber Stop for Cultipacker
Roller to rest on Drag Arm when not in use.
Grease Zerk on Pillow block bearing needs
to be filled periodically
(Above) Leverage Bar helps in Folding up and
folding back the Cultipacker Roller
(Above) Pin Assembly that holds Drag/Cultipacker
This Pin can be removed if the user wishes to do
Tillage only w/o Leveling with the Drag
3 POINT HOOK-UP
(Right) Top Link Pin with Clip and bolt
for I-Match Connection.
(Left) Lift Arm Pin with Clip and (2) Size
Sleeves for correct fit of Lift Arms.
I-Match Compatible
