Installation manual SR85/CF COVER FEEDER
11. Take the Cleaning plate, item 9 from the Cover feeder box.
12. Put the Cleaning plate behind and under the SR85 frame, and between the two
Fold rollers according to figure 3.
13. Attach the two springs on the white bracket according to figure 3.
14. Start the dead cycle program on the Booklet Maker by holding in the Program
select button and switching on the Main power switch, according to figure 4.
Figure 3
15. Close the Top cover.
16. Let the Booklet Maker run for approximately 2 minutes.
17. Turn off the Main power switch.
18. Remove the cleaning plate from the Booklet maker.
19. Install the folder bracket.
20. Install the two stapler heads.
21. Install the front cover on the Booklet Maker.
22. Turn on the Booklet Maker and hand feed 10 sets through the machine to be
sure that the fold rollers are clean.
Program select
button
Figure 4
1-3
