Installation manual SR85/CF COVER FEEDER
Secure the
orange and
Purple cable with
two cable ties.
Route the Orange
and Purple cable
along with the
existing Harness.
18. Route the Orange and Purple cable along with the existing Harness, according to
figure 3.
19. Secure the Orange and Purple cable with two cable ties, according to figure 3.
NOTE: Make sure that you loosen the screws towards the center of the transformer.
20. Loosen screw no. 9 on the terminal block and leave the White wire, according to
figure 3.
21. Insert the Orange wire from the PSH and the existing White wire to no. 9 on the
terminal block. Fasten the screw, according to figure 3.
22. Loosen screw no. 10 on the terminal block and leave the Blue wire, according to
figure 3.
Figure 3, view of machine
behind the Infeed cover
Loosen screw no. 9 and insert the
Orange wire, secure the two wires
by tightening the screw no.9
Step 18.
Step 19.
Loosen screw no. 10 and insert the
Purple wire, secure the two wires by
tightening the screw no.10
Step 20.
Step 22.
1-7