Podiatry Chair User Manual
5 |
P a g e
Power Supply
Ensure that hand or foot switch leads are clear of the moving parts of the chair
before operation. Connect the chair to a normal domestic type power supply
observing the following notes.
WARNING
Ensure that the mains lead, plug and socket are in good condition before
connecting the equipment.
Ensure that the mains cable has a clear run and is not stretched when connected
and that no one can fall over the cable.
CAUTION
When chair is not in use switch off power supply.
Lifting and Moving
Should the chair need to be moved or lifted (for example to remove it from its
packaging) then a minimum of two people are required. The chair must only be lifted
by the metal base frame near the wheels. If the chair is upside down then it may be
carried by holding it underneath the upholstery. When turning the chair over, please
make sure the frame and upholstery are supported at all times, otherwise damage
may occur to the upholstery and gas springs.
CAUTION
Under no circumstances lift the chair by the upholstery or top sections as damage
will occur to the gas spring mechanisms.