15
INTEGRATED AMPLIFIER
SOURCE COMPONENT INPUTS
Connect your Source to the input of the Plinius Hiato using suitable single-ended RCA or
Balanced XLR interconnect cables only. For RCA, make sure you connect the red coded
cable to the red RIGHT RCA input, and the white (or black) cable to the white LEFT RCA
input. Also make sure the RCA connectors are a snug fit and are inserted all the way in.
For CD XLR input connection, make sure you connect the RIGHT XLR input and LEFT
XLR inputs to the right and left outputs from your source respectively. Also make sure
the XLR connectors click into place. Use the input selection switch to select RCA if
you are using RCA inputs or to select XLR if you are using XLR inputs.
NOTE: DO NOT connect XLR and RCA at the same time, use only one or the other.
If a Phono input is fitted, this should be connected to a suitable source turntable only.
LOUDSPEAKER OUTPUTS
The connection of your loudspeakers to the output posts of the Plinius Hiato must be
made by an ‘instructed person’ or by suitable ready made loudspeaker cables only.
Connect your left loudspeaker (ie. the one on your left when seated in your normal
listening position) to the left output terminals, ensuring that the red positive (+) terminal
on the amplifier is connected to the red positive (+) terminal on your loudspeaker. Do the
same with the black or negative (-) terminals. Repeat this process for the right outputs.
TERMINATION QUALITY
Quality of the connections must be examined to ensure that high-performance,
trouble-free operation is enjoyed. Check that the connections are tight but do not
+ RIGHT – OUTPUTS – LEFT +
RIGHT SPEAKER
LEFT SPEAKER
CD PLAYER
HIATO CD INPUTS
