Section 2. Installing the PX-760A Internal ATAPI Drive
PX-760 Installation and Users Manual
13
•
Mode jumper
: Use the mode jumper to select operation as an IDE
master or slave, or for cable select. In general, leave this jumper at
its factory setting, which is master; and ensure that any other device
on the bus is jumpered as slave.
•
IDE cable connector
: Connects to your computer’s IDE (ATAPI)
interface using 80-conductor Ultra cable.
NOTE
: Although the PX-760A will operate with a 40-wire IDE cable, it
may not be able to write at 18X unless an 80-conductor IDE/ATA
cable is used.
•
Power connector
: Connects to your computer’s power supply to
provide DC +5 volts and +12 volts to the PX-760A.
What Else Is In the PX-760A Box
What you find in your Plextor box depends on what the company that
sold you the box put in—or took out—while the Plextor drive was in
their possession. Plextor currently sells the PX-760A drive in this
configuration:
•
PX-760A DVD±R DL, DVD±R/RW and CD-R/RW drive
•
Replacement front bezel (beige) and disc tray front panel
•
80-conductor IDE/ATA cable
•
1 piece of approved DVD+R media
•
4 mounting screws
•
Emergency eject tool
•
Spare jumper
•
Plextor software disc with bundled PlexTools® Professional. Also
contains Roxio Easy Media Creator 7 Basic DVD Edition, and a
PDF of the
PX-760 Installation and Users Manual
.
•
PX-760 Quick Installation Guide
