Plextor PX-504A, Installation And User Manual

Page: 38 / 56

Appendix A: PX-504A Specifications
32
PX-504A Installation and Users Manual
Rear Panel
Power Supply DC +12V,
+/-10% DC +5V,
+/-5%
Typical standby current 130 mA 55 mA
Typical read current
(CD 17-40X) 700 mA 480 mA
Typical DVD write
current (DVD+R 4X) 500 mA 530 mA
Typical CD write current
(CD-R 16 X) 430 mA 700 mA
Typical pause current
(CD 4-10X CAV)
260 mA 940 mA
Peak current 1.4 A 1.1 A
IDE Interface Connector IDE bus, 40-pin flat ribbon type. Interface complies with
ATA/ATAPI-5. Maximum total cable length cannot
exceed 18 in (45.7 cm).
Analog Audio Output Stereo analog output, Molex connector (L*G*G*R),
MPC-3 standard:
ƒ
Output voltage (max. volume): 0.75V( rms) +/- 3dB
ƒ
Load impedance: 10 k ohms
ƒ
S/N ratio: Min. 75dB
ƒ
Total harmonic dist noise: Max. 0.1% (1kHz)
ƒ
Dynamic range: Min. 75dB (1kHz)*
ƒ
Channel separation: Min. 70dB (1kHz)*
ƒ
Frequency characteristic: 20Hz to 20kHz (0dB +-3dB)
* Not confirmed at time of printing
Digital Audio Output Digital audio output for input to SPDIF or Digital-In input
Mode Jumper Master (default), slave, cable select (CSEL)
DVD Regional Setting
Compatibility
RPC phase-2-compatible
Changing regional
setting Max. 5 times