Plebani 098, Assembly And Use Instructions

Page: 15 / 24

ASSEMBLY AND USE INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
ASSEMBLING:
1- After remove and thrown away poly- bags and packing, open the stroller and
at the same time unlock the two levers on the handlebars (Pic. 1); pull
upwards opening the stroller completely and check it’s correctly locked (Pic.
2).
2- Verify that the rotation system lock is unlocked (Pic. 3). Insert front wheels
(Pic. 4) pressing until it CLICKS into place. Front wheels are swivel; to lock
them, lift the lever.
3- Insert the rear wheels, keeping the brakes outwards (Pic. 5) pressing until it
CLICKS. Insert the brakes lead into the special slot (Pic. 6a - Pic. 6b). Thanks
to the system of “one touch-two brakes”, to set the brakes, press on one of the
two levers (Pic. 7). To release the brakes, lift the lever. ALWAYS SET THE
BRAKES WHEN THE STROLLER IS NOT MOVING AND ON NOT PLANE
SURFACES!
4- To fix the seat, insert hinges into holes, pressing buttons; push well till the end
(Pic. 8). Put the regulators of position into theirs leads (Pic. 9). Place the sit, fix
the padding sides to the armrests (Pic. 10a - Pic. 10b). Fix the lateral buttons of
the backrest (Pic. 11). To install the footrest, insert it into the two hinges of
regulation (Pic. 12). Fasten the buttons of the seat at the frame (Pic. 13) and
put the crotch belt into its hole (Pic.14).
QUALITY GUARANTIES:
- Our stroller is made according to the European standards EN 1888/2003.
- This product is guaranteed for a period as stated by the laws in force.
- All the defects and deteriorations caused by the wrong use, by the non respect of the
standards of security, by the non respect of the mentioned assembly and use
instructions or by modifications made on the item can't be claimed.
- The natural wear of time and the damages caused by the improper or wrong use can't
be claimed.
- Scratches, wear of time, opacity or the turning yellow of the parts caused by the
rubbing, by the improper use of detergents, sweat or atmospheric phenomenons
cannot be considered as manufacturing defects.
- Wrong washing and not dry fabrics can create moulds and cannot be considered as
manufacturing defects.
IMPORTANT!:
BEFORE USE THIS ITEM, READ CAREFULLY INSTRUCTIONS AND ASSEMBLING SEQUENCE TO
AVOID USELESS DANGER TO YOUR BABY!
THROW AWAY AND KEEP OUT OF BABY'S REACH THE POLY BAGS OF THE PACKING, THEY MIGHT
BE RISKS OF SUFFOCATION!
NEVER LEAVE YOUR CHILD UNATTENDED!
UK