18
BEFORE YOU LEAVE
Prior to heading off on your adventures, you should always
check to ensure that:
• The LP gas is turned OFF at the main valve;
• The black and gray waste water tanks are empty with the
dump handles closed;
• All electrical cords and exterior hoses are stored back into
their respective compartments;
• Chassis fluid levels are at recommended levels;
• Chassis tire pressure levels are at recommended levels;
• Chassis exterior lighting is functional;
• All exterior components are secure and closed;
• The refrigerator power switch is changed to 12-volt;
• All interior compartments and drawers are closed and
latched;
• All interior components are secure and in place;
• The furnace control switch is off;
• The TV swing-out is locked into the closed position; and
• The site is left in better condition than when you arrived.
WHILE IN MOTION
While in motion, set refrigerator to operate in DC mode.
Use of any other appliance is not reccomended while the
motorhome is in motion.
Always wear your seat belt when the vehicle is in motion.
Only forward facing seats are equipped with seat belts.
WARNING:
Do not use LP appliances while the vehicle is
in motion.
TRAVEL PREPARATION
UPON ARRIVAL AT YOUR SITE
Once you arrive at a site, please ensure that:
• Your motorhome is parked in a level position so that your
components will perform optimally (place a bubble level on the
freezer shelf of the refrigerator and level your unit according to
this)
• All exterior vents are clear from obstructions
• The black and gray water waste tank valves are closed
• The AC power cord is attached to the vehicle and to the site
receptacle (120 volt 30 amp)
• You hook the fresh water line to the city connection or fill the fresh
water tank and turn on your water pump
• The LP gas switch is turned ON
• The refrigerator is switched to 110-volt power, and
• The water heater switch is turned ON.
