Cini Remote 900MHz Operation Manual
12/6/2011
PLC Electronic Solutions Ltd.
Copyright © 2011
www.plcelectronicsolutions.com
8 of 9
4. Common Issues and Solutions
4.1. Range/Interference (dropouts) with other 900MHz Devices
Put as much physical distance between the receive and transmit
antenna’s and any other antenna as is practical.
Change the channel on the Cini Remote Receiver and Cini
RemoteTransmitter, test and then try to change the channel on your
other 900MHz devices if possible.
4.2. Dead Batteries (----) on display
When the 9 volt battery gets low the lit ft or m LED fill flash continuously
on the Cini Remote Receiver. The the battery gets too low it will not
receive properly and will eventually just show 4 dashes (----) on the
screen.
4.3. Switching channels
Please see 3. Hardware Functionality for more information.
4.4. Spare Parts Ordering
Order spare parts online at
www.plcelectronicsolutions.com
.
4.5. Powering without a 9V battery
Remove the battery pack fron the Cini Remote Receiver and plug the
Cini Data Cable directly into the Cini Remote Receiver.
