Cini Remote 900MHz Operation Manual
12/6/2011
PLC Electronic Solutions Ltd.
Copyright © 2011
www.plcelectronicsolutions.com
5 of 9
2.3. Cini Remote Receiver
Attach the antenna to the Cini Remote Receiver and insert a 9 volt battery making
sure the positive (+) side of the battery is connected to the positive (+) of the reverse
polarity protected Cini Battery Holder.
The display should now light up. To change and indicate the current channel see
the instructions in the 3.2.1 Functionality section. The data from Cine Tape
Measure System will now show on the display.
3. Hardware Functionality
3.1. Cini Remote Transmitter
3.1.1. Functionality
The 7 segment readout indicates the radio Channel 0 – 6 (7 channels).
Holding down the Up button will move the channel up and conversely
holding down the Down button will move the channel down. Release the
button once the channel has been selected and the channel will
automatically save to memory.
