Cini Remote 900MHz Operation Manual
12/6/2011
PLC Electronic Solutions Ltd.
Copyright © 2011
www.plcelectronicsolutions.com
6 of 9
3.1.2. Specifications
3.2. Cini Remote Receiver
3.2.1. Functionality
The four 7 segment readouts indicate the camera to scene distance.
The ft LED indicates that the readout is in feet and therefore the Cine
Tape Measure System is set to feet while the m LED indicates that the
readout is in meters and therefore the Cine Tape Measure System is set
to meters.
If you press down the sw button the Cini Remote Receiver will toggle
between low and high brightness modes. This setting will be saved in
memory.
If you hold down the sw button while powering up the unit you will be able
to cycle through the 7 Channels 0 – 6. Release the button at the
appropriate channel. This setting will be saved in memory. (You MUST
have both the Cini Remote Transmitter and Cini Remote Receiver on
the same channel for communication)
If you hold down the sw button while powering up the unit and allow the
unit to cycle through all of the channels 3 times; def indicating default will
flash on the readout. Releasing the button here will set the Cini Remote
Receiver to factory defaults.
When there is approximately 20 minutes of battery life left the lit ft or m
LED fill flash continuously.
Min.
Avg.
Max.
Case Size
97 x 45.85 x 23.2 mm (0.9” x 1.8” x 3.8”)
Weight
132 grams (4 5/8 oz.)
Temperature Range
degC(F)
-40(-40)
+85(185)
Input Voltage (V)
6
30
Output Voltage (V)
5
Current at 9V (mA)
58
Current at 24V (mA)
33
