9
GB
3b) Attach the lower connector (16) to the fork
(Fig. E).
Ensure it is slotted securely to the
T-connector.
3c) Attach the frame (5) to the fork (Fig. F).
Ensure it is slotted securely.
3d) Attach the top connector (17) to the fork
(Fig. G).
4. Install basket
Attach the basket (19) to the fork (Fig. H).
5. Install handlebar
5a) Attach the clamp (18) to the fork (Fig. I).
Ensure slotted securely.
5b) Attach a cover (4) to the handle tube (Fig. J).
5c) Insert the handle tube into the fork (Fig. K).
Please note the maximum extension
marking.
Use the tool (22) to tighten the nut on the
clamp and slide the cover over the clamp.
6. Install saddle
6a) Attach a cover to the saddle with seatpost
(3) (Fig. L).
6b) Insert the seatpost into the opening on the
frame (Fig. M).
Please note the maximum extension
marking.
Tighten the nut with the tool to secure the
saddle, then slide the cover over the nut.
7. Install protective handlebar
cushion
Attach the protective handlebar cushion
(1) to the handlebar with the hook and
loop fastener (Fig. N).
8. Sticker Set
Apply the sticker set 1 or set 2 (21) in the
specified locations (Fig. O).
Safety instructions for use
• Be aware that children are not always able
to correctly assess their own abilities and
certain dangerous situations. When distracted
by games they are playing, children can get
into hazardous situations beyond the
distributor’s/manufacturer’s responsibility.
• Instruct children on the proper use of this
product and alert them to potential risks.
• Children must be able to control braking at
all times. Practice braking by foot and by
brake before using the product.
• Smooth surfaces are slip hazards. Remember
that using this product always involves the risk
of collisions.
Assembly
CAUTION
!
The product must always be assembled by
an adult.
CAUTION
!
Keep children away from the product
and packing materials during assembly. Small
parts which could be swallowed or inhaled and
plastic bags may present choking hazards.
1. Install mudguard
Attach the front mudguard (11) to the fork
(14) with screw (12) and nut (13) (Fig. B).
Ensure the slot on the fork is facing the
longer side of the mudguard.
2. Install front wheel
Attach the front wheel (9) to the fork with
2x spacers (8), 2x washers (7) and the axle
screw (6) (Fig. C).
3. Install the frame
3a) Attach the T-connector (15) to the fork
(Fig. D).
Ensure the slot is facing the longer side
of the mudguard.
Summary of Contents for 103988
Page 3: ...5...