background image

 

 

 

 

 

 

                      

 

©

2006 Pacific Cycle, Inc.

 

 

Owner’s Manual and Assembly Instruction 

 

Model 

#: 

22-PS150 

 

    Model Name: Bristol Swing Set 

Manual Date: September, 2008 
 

 

 

 
Important:  Keep this owner’s manual; do not discard in case you need to contact Pacific Cycle, Inc.  
in the future.  Should there be a change of ownership, please transfer this manual to the new owner to 
ensure proper assembly and safety.   

 

90 DAY LIMITED WARRANTY 

 

Pacific Cycle, Inc. warrants this product to be free of defective materials and workmanship for 90 days from 
the date of original purchase.  

THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT, 
AND IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTY.  ANY IMPLIED WARRANTIES, 
INCLUDING ANY WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS 
FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE DURATION OF THIS 
EXPRESS WARRANTY.   

This limited warranty gives you specific legal rights and you may also have 

other rights which may vary from state to state.  This warranty is extended only to the original consumer 
purchaser for non-commercial use. 
PACIFIC CYCLE, INC. IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES.  THIS LIMITED WARRANTY DOES NOT COVER ANY PERSONAL INJURIES, 
DAMAGE TO, OR FAILURE OF THE PRODUCT OR ANY OTHER LOSSES DUE TO ACCIDENT, 
ABUSE, MISUSE, ALTERATION, NEGLECT, NORMAL WEAR AND TEAR, RUST, IMPROPER 
ASSEMBLY, IMPROPER FIT, IMPROPER MAINTENANCE OR USE OF UNAUTHORIZED 
REPLACEMENT PARTS NOT DESIGNED FOR THE PRODUCT. 

Summary of Contents for Bristol 22-PS150













Reviews: