7
©
2006 Pacific Cycle, Inc.
4
Remove the hardware from the middle
section of a leg. Match up the holes of the
mid-leg and support bar and re-insert the
hardware through both. Repeat the process
for the opposite side and center legs. It
may be necessary to pull both legs towards
each other in order for the holes to align
properly.
NOTE:
One support bar has holes for the
slide attachment. The holes should be
positioned toward the front of the swing set.
Part Ref. #: PSHW12
GLIDER ASSEMBLY
Required
Parts:
Vertical
Poles
x2
(Footrests
attached)
Horizontal Poles x2 (Seats attached)
Glider attachment x1
Pre-Assembled Parts:
•
The seats should be attached to the horizontal poles. These must be disassembled to complete the steps below.
•
The foot rests should be attached to the vertical poles.
Step Illustration
Instructions
Hardware
Reference
1
Secure the glider attachment with the V-
screw and the bolts at the squared portion
of the top bar.
Part Ref. #: PSHW35, PSHW22
