5/16 X 4-1/2"
FRONT OF FORT
(OFFSET UP)
2 X 6 X 70"
(OFFSET UP)
5/16" WASHER
SANDBOX BOARD
BOARD
BOARD
FRAME
(OFFSET UP)
HEX BOLT
LEFT SIDE
FRONT FACE
FRONT TOP PANEL
2 X 6 X 70"
2 X 6 X 70"
RIGHT SIDE
FRAME
STEP 5: FRONT FRAME ASSEMBLY
1: PLACE THE 2 X 6 X 70" SANDBOX BOARD ON THE FRONT OF THE CORNER POSTS AT THE BOTTOM. THE HOLES IN
THE SANDBOX BOARD MUST BE OFFSET UP.
2: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE SANDBOX BOARD TO THE
T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
3: PLACE THE 2 X 6 X 70" FRONT FACE BOARD WITH NOTCHES ON THE FRONT OF THE CORNER POSTS AT THE MIDDLE.
THE HOLES IN THE FRONT FACE BOARD MUST BE OFFSET UP.
4: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE FRONT FACE BOARD TO
THE T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
5: PLACE THE 2 X 6 X 70" FRONT TOP PANEL BOARD ON THE FRONT OF THE CORNER POSTS DOWN FROM THE TOP AS
SHOWN. THE HOLES IN THE TOP PANEL BOARD MUST BE OFFSET UP.
6: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE FRONT TOP PANEL BOARD
TO THE T-NUTS INSTALLED ON THE CORNER POSTS.
40
