ROPE LADDER
ROPE LADDER
2 X 6 X 79-1/2"
HEX BOLT
SUPPORT
5/16" WASHER
RUNNER
LAG SCREW
5/16" X 3-1/2"
2 X 6 X 79-1/2"
5/16" X 4-1/2"
5/16" WASHER
EQUAL TO BOTTOM DIMENSION
14"
BOTTOM DIMENSION
14"
5/16 X 3-1/2" LAG SCREWS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE ROPE LADDER SUPPORT TO
CORNER POSTS AND THEN MAKE THE OUTSIDE TOP OF THE CORNER POSTS EQUAL TO THAT MEASUREMENT. USE
STEP 2: ASSEMBLING THE RIGHT SIDE FRAME
THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
OF
FORT
1: LAY THE 2 X 6 X 79-1/2" ROPE LADDER RUNNER ON TOP OF THE RIGHT SIDE CORNER POSTS AT THE BOTTOM OF
THE CORNER POSTS. THE HOLES IN THE ROPE LADDER RUNNER MUST BE OFFSET DOWN.
2: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE ROPE LADDER RUNNER TO
THE T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
3: LAY THE 2 X 6 X 79-1/2" ROPE LADDER SUPPORT ON TOP OF THE RIGHT SIDE CORNER POSTS, AND MEASURE 14"
FROM THE TOP OF BOTH CORNER POSTS.
4: BEFORE INSTALLING LAG SCREWS, MEASURE THE DISTANCE ACROSS THE OUTSIDE OF THE BOTTOM OF THE
FRONT
37
