Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
TRI-PAD TRAVERSE RV
INSTALLATION INSTRUCTIONS
Rev C
3/30/2013
RV-1419
Page 5 of 5
Parts List
Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
Assembled Parts List
S-1419-RV
Part #
DESCRIPTION
QTY
FS-1419-RV
Disc Traverse Beam RV
1
IE-0010
Traverse U-Joint
3
4-9339042
Washer Flat 3/8" x 7/8" O.D. x .100" Thick
4
9103032-TR
Bolt Button Head 3/8" x 3/4"
6
9103052-TR
Bolt Button Head 3/8" x 1"
4
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
6
9345002
Washer Flat SAE 1/2"
18
9443052-TR
Nut Barrel 3/8" x1-1/8" BH
6
S-1419-1RV
Part #
DESCRIPTION
QTY
FS-1419-1RV
Disc Traverse Beam 1 Mount RV
1
IE-0010
Traverse U-Joint
3
4-9339042
Washer Flat 3/8" x 7/8" O.D. x .100" Thick
2
9103032-TR
Bolt Button Head 3/8" x 3/4"
6
9103052-TR
Bolt Button Head 3/8" x 1"
2
9143062-TR
Bolt Shoulder 3/8" x 1-3/8" BH
1
9263012-TR
3/8" x1/2" Socket Set Screw
1
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
6
9345002
Washer Flat SAE 1/2"
20
9443052-TR
Nut Barrel 3/8" x1-1/8" BH
6
9443062-TR
Nut Barrel 3/8" x 1-3/8"
1
Part #
DESCRIPTION
QTY
DE-0024-H
Tri-Pad with Hole
3
EE-0142
Tri-Pad Cap
3
FS-1419-TRI
Tri-Pad Traverse Station
3
HE-0001
Disc Traverse Chain
3
LE-0011
Tri-Pad Support Sleeve
3
450383
S Hook
3
9103032-TR
Bolt Button Head 3/8" x 3/4"
18
9221272
Screw #12 x 1-1/2" SQDR PH
9
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
12
S-1419-2RV
Part #
DESCRIPTION
QTY
FS-1419-2RV
Disc Traverse Beam 2 Mount RV
1
IE-0010
Traverse U-Joint
3
9103032-TR
Bolt Button Head 3/8" x 3/4"
6
9143062-TR
Bolt Shoulder 3/8" x 1-3/8" BH
2
9263012-TR
3/8" x1/2" Socket Set Screw
2
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
6
9345002
Washer Flat SAE 1/2"
22
9443052-TR
Nut Barrel 3/8" x1-1/8" BH
6
9443062-TR
Nut Barrel 3/8" x 1-3/8"
2
DISC TRAVERSE BEAM RV:
Shall be fabricated using 2.375" O.D. 10 gauge
steel tubing with welded 3/8" thick steel tabs and
1/4" thick stainless steel mounting brackets. The
Disc Traverse Beam RV shall have a multi-stage
baked-on powder coat finish.
DISC TRAVERSE BEAM 1 MOUNT RV:
Shall be fabricated using 2.375" O.D. 10 gauge
steel tubing with welded 3/8" thick steel tabs, 1/4"
thick stainless steel mounting bracket and stainless
steel housing. The Disc Traverse Beam 1 Mount RV
shall have a multi-stage baked-on powder coat
finish.
DISC TRAVERSE BEAM 2 MOUNT RV:
Shall be fabricated using 2.375" O.D. 10 gauge
steel tubing with welded 3/8" thick steel tabs and
stainless steel housings. The Disc Traverse Beam 2
Mount RV shall have a multi-stage baked-on
powder coat finish.
DISC TRAVERSE CHAIN:
Shall be 5/0 galvanized low-carbon steel chain with
silver shield finish.
TRI-PAD TRAVERSE STATION:
Shall be fabricated using 1.660" O.D. 11 gauge
steel tubing with welded 1/4" thick steel mounting
plate and 3/8" thick steel tabs. The Tri-Pad Traverse
Station shall have a multi-stage baked-on powder
coat finish.
TRI-PAD CAP:
Shall be made from high density 3/4" sheet plastic
specially formulated for optimum UV stability and
color retention.
TRI-PAD WITH HOLE:
Shall be constructed of UV-stabilized, rotationally
molded, linear, low density polyethylene with an
average wall thickness of .250".
TRAVERSE U-JOINT:
Shall be stainless steel to resist rust and corrosion.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
