Playcraft Trans-Glide 1975 Assembly/Installation Instructions Download Page 19 | Manualshive

Page: 19 / 19

background image

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)

TRANS-GLIDE ASSEMBLY

INSTALLATION INSTRUCTIONS

Rev B

10/13/2016

1975

Page 19 of 19

TRANS-GLIDE DAMPENER PLATE:
Shall be made from Ultra High Molecular Weight
Polyethylene for lasting durability.

TRANS-GLIDE DRIVE ARM & DRIVE PLATE:
The Trans-Glide Drive Arm and Drive Plate shall be
precision cut from 1/2" thick steel. The Trans-Glide
Drive Arm and Drive Plate shall have a multi-stage
baked-on powder coat finish.

TRANS-GLIDE DRIVESHAFT:
Shall be fabricated using 1.660" O.D. 11 gauge
steel tubing with welded machined steel spindles
and 1/4" thick steel mounting plate.The Trans-Glide
Driveshaft shall have a multi-stage baked-on
powder coat finish.

TRANS-GLIDE DRIVESHAFT BRACKET:
Shall be fabricated using precision cut and welded
1/2" thick steel tabs. The Trans-Glide Driveshaft
Bracket shall have a multi-stage baked-on powder
coat finish.

TRANS-GLIDE HANDLE:
Shall be made from high density 1" sheet plastic
specially formulated for optimum UV stability and
color retention.

TRANS-GLIDE DRIVE HOUSE:
Shall be fabricated using 3.5" O.D. 11 gauge steel
tubing with welded 10 gauge steel gussets and 1/4"
thick steel mounting plates. The Trans-Glide Drive
House shall have a multi-stage baked-on powder
coat finish.

TRANS-GLIDE PANEL SET:
Shall be made from high density 3/4" sheet plastic
specially formulated for optimum UV stability and
color retention.

TRANS-GLIDE TORSION ARM:
Shall be fabricated using 3-1/2" square 3/16" thick
wall tubing with welded 1/4" thick steel gussets and
1-1/4" square 1/8" thick wall tubing arm. The Trans-
Glide Torsion Arm shall have a multi-stage baked-
on powder coat finish.

TRANS-GLIDE TRACK WHEEL:
Shall be machined Nylon 6/6.

TRANS-GLIDE WHEEL HUB:
Shall be fabricated using precision cut and formed
3/8" thick steel and machined stainless steel axles.

TRANS-GLIDE WHEEL HUB STIFFENER:
Shall be punched, formed, and welded from 10
gauge sheet steel. The Trans-Glide Wheel Hub
Stiffener shall be Play-Tuff™ coated after
fabrication.

MOUNTING BLOCKS:
Shall be two-part and precision die-cast from a high
strength aluminum alloy. The Mounting Blocks have
a multi-stage baked-on powder coat finish.

HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.

Specifications

Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.

Maintenance

«
...
17
18
19

Summary of Contents for Trans-Glide 1975




















Reviews:

No comments

Related manuals for Trans-Glide 1975

Brand: Landoll Pages: 71

Brand: Baltic Pages: 68

Brand: H&S Pages: 76

Brand: Vitax Pages: 12

Brand: Maselec Pages: 6

DuraTech 45' 3-Way Retrieval SRL-R

Brand: Falltech Pages: 18

Brand: VividLeds Pages: 2

Brand: Ivoclar Vivadent Pages: 92

Brand: Veeder-Root Pages: 58

Brand: Zhermack Pages: 200

Brand: Tegam Pages: 27

Brand: Vaisala Pages: 89

select SUPERLITE POWER PEN

Brand: M+W Dental Pages: 58

Coax Clarifier TCC200

Brand: T3 Innovation Pages: 39

PITAGORA INLINE

Brand: Maschio Pages: 100

Brand: Elenco Electronics Pages: 4

Brand: Bacharach Pages: 32

Brand: Chauvet Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands