Playcraft Trans-Glide 1975 Assembly/Installation Instructions Download Page 16

Page: 16 / 19

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com

TRANS-GLIDE ASSEMBLY

INSTALLATION INSTRUCTIONS

Rev B

10/13/2016

1975

Page 16 of 19

FIGURE 45

3/8" Lock Nut
3/8" x 1" O.D.
Washer

3/8" x 1" O.D.
Washer
3/8" x 1" Button
Head Bolt

3/8" x 2" Button

Head Bolt

3/8" x 1" O.D.

Washer

SKIRT

3/8" x 1-1/4"

Button Head Bolt

Step 45

Attach Seat Panels to Bench Backs and Side Panels
as shown in Figure 43. (See Note A)

Step 46

Using the Trans-Glide Base as a template locate
and mark anchor hole locations. Install Expansion
Anchors. (See Notes B, D & E)

IMPORTANT: Refer to Detail View Deck Gap and
Top View Footing Layout.

Step 47

Attach Trans-Glide Assembly to Expansion
Anchors. (See Notes B, D & E)

WARNING: The Required gap must be varified
prior to using. Refer to Detail View Deck Gap and
Top View Footing Layout.

Step 48

Attach Skirts to Side Panels as shown in Figure 44.

NOTE: Do not use liquid thread lock.
(such as Loctite

)

Step 49

Attach Skirts to Trans-Glide Decks and Side Panels
as shown in Figure 45.

NOTE: Do not use liquid thread lock.
(such as Loctite

)

Step 50

Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.

WARNING: The Required gap must be varified
prior to using. Refer to Detail View Deck Gap and
Top View Footing Layout.

Step 51

Place required protective surfacing under and
around Trans-Glide Assembly. (See Note F)

FIGURE 44

3/8" x 1" O.D.
Washer
3/8" x 1-1/2"
Button Head Bolt

3/8" x 1" O.D.

Washer

3/8" Lock Nut

SKIRT

FIGURE 43

3/8" x 5/8"

Barrel Nut

1/2" SAE

Washer

3/8" x 1" Button Head Bolt

3/8" x 1" O.D. Washer

BENCH BACK

SEAT PANEL

3/8" x 1-1/2"
Button Head Bolt

3/8" x 7/8" O.D.
Washer

1/2" SAE Washer
3/8" x 5/8"
Barrel Nut

Summary of Contents for Trans-Glide 1975




















Search results

Summary of Contents for Trans-Glide 1975

Reviews:

Related manuals for Trans-Glide 1975

Brands by name

Popular brands

Playcraft Trans-Glide 1975, Assembly/Installation Instructions

Search results

Summary of Contents for Trans-Glide 1975

Reviews:

Related manuals for Trans-Glide 1975

Brands by name

Popular brands