For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
GEO-WAVE CLIMBER HORIZONTAL
Rev C
1249-DDH \-DGH
Page 3 of 6
3/8" Lock Nut
3/8" x 1-1/4"
Button Head Bolt
Attach Deck Mount Brackets to face of deck as shown
necessary. (See Note A.)
below in Figure 1.2. Attach additional Brackets as
Deck Face
DECK MOUNT BRACKET
Step 5
and Note C)
Step 4
Attach Half Walls to deck(s).
(Refer to Section 1309 of the Installation Manual
3/8" x 1" O.D.
Washer
Half Wall
(R5 Shown)
VENT PLUG
(Factory Assembled)
shown below in Figure 1.1
Plug vent holes at each end using the Vent Plugs as
CLIMBER
#10 Pan Head Screw
Step 3
GEO-WAVE
Vent Hole
Figure 1.2
Figure 1.1
NOTE: R5 Configurations shown. R3.5 will vary
slightly, but does not affect the assembly.
Drill 1/4" drain holes
14 Pl.
Step 2
(Factory Drilled)
Drill 1/4" drain holes as shown below.
