www.dero.com | 1-888-337-6729
© 2018 Dero
BIKE DEPOT
Installation Instructions - Panels
Anchor the lower door stops to the concrete with
(2) 3/8 x 3” wedge anchors and (2) Penta nuts
in place of the hex nuts. The lower door stops
should be directly below the upper door stops
and just contact the door when it’s closed. The left
and right lower door stop may be placed slightly
off to accommodate some distortion in the doors.
Attach the door lock bar to the right door with (8) ¼ x
3” carriage bolts, (4) front door stops, (4) spacers, (8)
washers, (4) tube clamps, and (8) nylock nuts. Once
bolts are tightened the lock bar should rotate freely.
Attach the latch assembly and cover with (6) 3/8
x 1” security bolts, and (6) 3/8” washers. The latch
assembly can be laterally positioned so the lock bar
strike enters and exits the latch smoothly.
Fill the (8) 3/8” holes in the left door with (8) ¼ x
2.5” carriage bolts, (8) lock washers, and (8) nuts.
8
10
11
9
Line up top and bottom door stops
1/4” Nylock Nut
Tube Clamp
Door Lock Bar
1/4” Washer
Spacer
Front Door Stop
.25 x 3” Carriage Bolt
