Playback MPS-3, User Manual

Page: 8 / 23

MPS-5 User Manual
8
REMOTE CONTROL UNIT
MUTE
DISC
AES
COAX
TOS
PLINK
PC
AUX
PHSE
DIM
Mutes the analog outputs, but not the digital ones.
Input Selections:
Selects and activates the drive system.
Selects the AES input for conversion to analog.
Selects the COAX input for conversion to analog.
Selects the TosLink input for conversion to analog.
Selects the PlayLink input for connection to USB-X.
Selects the USB input from PC.
Not used.
During any input selection other than DISC, the drive
system is powered off and requires a few seconds to
boot when selected again.
Open / close tray
The first time this buttons is pressed the alpha-
numeric display indicates the absolute phase for the
analog outputs. If it is pressed again within 5
seconds the absolute phase is toggled.
Dims display on front panel.
If these buttons are pressed for less than 1 second
they allow you to jump tracks in sequential order. If
during normal playback they are held for more than 1
second the player enters Scan Mode, in either
forward or reverse direction. Subsequent button
presses (short) will increase the Scan speed.
Scan Mode can be exited by repeatedly pressing this
button until normal playback, or by pressing STOP or
PLAY.
Stops the transport.
Starts playback. Can also be used to close the tray
and immediately start playback.
Toggles pause function on and off.
Playback
Scan 1 Scan 2 Scan 3