Playback MPS-3 User Manual Download

Page: 23 / 23

MPS-5 User Manual

Subsequent Upgrade Procedure:

After you have used the PDUpdate utility for the first time a shortcut PDUpdate is

installed on the desktop of your PC as well as in the START>PROGRAMS>Playback

Designs folder. There is no need to launch the “PDSetup.exe” application anymore.

1. Turn on power to the MPS-5.

2. Connect your MPS-5 to the PC via a USB cable.

3. Launch PDUpdate from the desktop of your PC and you should see the above

screen directly.

4. Proceed from here as for the first time installation.

IMPORTANT NOTE:

THE ENTIRE UPDATE PROCEDURE CAN TAKE SEVERAL MINUTES. IT IS

IMPORTANT THAT YOU DO NOT INTERRUPT POWER TO THE MPS-5, NOR

DISCONNECT THE USB CABLE, NOR TURN OFF THE PC DURING PROGRAMMING,

OR ELSE YOUR MPS-5 WILL NOT BE ABLE TO BOOT NORMALLY.

In case the programming has been interrupted accidentally, please follow the steps

below:

1. Turn off power to the MPS-5 via its back panel switch.

2. Press and hold the Boot button on the back panel.

3. Turn power back on. Release the Boot button.

4. Proceed as described under “Subsequent Upgrade Procedure”.

Summary of Contents for MPS-3
























Search results

Summary of Contents for MPS-3

Reviews:

Related manuals for MPS-3

Brands by name

Popular brands

Playback MPS-3, User Manual

Search results

Summary of Contents for MPS-3

Reviews:

Related manuals for MPS-3

Brands by name

Popular brands