MPD-5 User Manual
16
CHANGING THE FUSE ON THE MPD-5
Inside the power connector on the rear panel of the MPD-5 is a fuse that protects the converter from
dangerous power surges. If the converter fails to power up or no light on the front panel is lit then proceed as
follows to change the fuse:
1. Locate fuse compartment on power connector on
rear panel.
2. Use a small screw driver to pry open the fuse
holder.
Fuse Compartment
Prying open with a small screw driver
3. The fuse holder contains 2 fuses. The top one is a
spare and can replace the blown one at the bottom.
4. Replace fuse holder into power connector by
making sure that good fuse is at bottom.
Replacement fuses should be rated: 1.6A / 250V
slow blow, 20mm.
