Play Mor Watch Tower, Assembly Instructions Manual, Page: 14 / 20

S
TEP
#16
A. Drape the Canopy over the Canopy Attachment and down over the side of one end of the
Tower. Align the bottom of the Canopy
with the bottom of the 2x6 and fasten it in
place with 7 — 1⅛” Canopy Screws.
B. At the opposite end of the Tower, pull the Canopy somewhat taut while making sure that it is
laying nicely all along the peak of the Canopy Attachment. Fasten the Canopy with 7 — 1⅛”
Canopy Screws.
HARDWARE
(
THIS PAGE
)
14 — 1⅛” C
ANOPY
S
CREWS
2 — 2¼”
SCREWS
C. From inside the Tower, push up at one
end of the Canopy Attachment and in-
sert 1 — 2¼” screw at an angle as pic-
tured at right. Repeat at the opposite
end. This ensures that the Canopy is
taut.