Play Mor Poly Watch Tower, Assembly Instructions Manual, Page: 26 / 28

A
CCESSORY
I
NSTRUCTIONS
G
ANG
P
LANK
I
NSTALLTION
 Place the gang plank mounting face against the tower directly below a
standard opening. The
floor of the gang plank
should be aligned with the
floor of the tower. From
underneath the tower, in-
sert 2
- 3” screws through
the floor frame and into
the mounting face of the
gang plank.
 Next install 2 - 3” lag
bolts through the floor
frame and into the mount-
ing face of the gang
plank. Predrill for each
lag bolt with a 9/32” drill
bit before installing the
lag bolts.
Drill 4 - 3/4” holes in the rail slats at the top of the gang
plank. The first set at 16” from the bottom of the slats
and the second set at 27½”.
After the holes are drilled push the rope through the
holes, pull tight, and make a knot to secure the rope.