Play Mor Poly Watch Tower, Assembly Instructions Manual, Page: 18 / 28

Step #13
Place the canopy roof attachment on the tower. Find and mark the center of the tower.
Then measure
¾
” from the center. Attach the #11 upright with the edge that has the #12
on it at the ¾” mark so that the #12 is in the middle of the tower. Make the bottom of
the uprights flush with the #1 2x6’s. Fasten the upright with 1 - 4” screw on each end.
Next square the canopy roof attachment with the tower and finish fastening it by adding
2 - 4” screws on each side as
shown.
HARDWARE
(
THIS PAGE
)
6 - 4”
SCREWS
Center of
Tower
¾”
The #12 2x4 should be in
center of the tower.
Square
and finish
fastening.
Place screws
as shown.