A
CCESSORY
I
NSTRUCTIONS
W
AVE
S
LIDE
I
NSTALLATION
Center the wave slide in a standard opening. From outside the tow-
er make sure that the slide is correctly angled, not to the right or
left. Fasten the slide to the
deck using 3
-
slide
screws with washers. In-
sert the screws through
the deck and into the floor
frame 2x4. Do not over
tighten these screws. They
can easily strip out and
not hold. No fastening is
required at the bottom of
the slide.
S
COOP
W
AVE
S
LIDE
I
NSTALLATION
A.
Center the scoop wave slide in a stand-
ard opening. Make sure the upright
mounting face of the slide is pushed
against the tower. Insert 1
-
4¼” lag
from the scoop wave slide hardware
pack
(packaged separately)
into each
of the two holes in the upright mount-
ing face. This should securely anchor
the slide against the tower.
B.
Use the remaining screws and washers
from the scoop wave slide hardware pack to
fasten the slide to the deck as pictured at
left. Do not over tighten these screws. They
can easily strip out and not hold. No fas-
tening is required at the bottom of the slide.
Summary of Contents for Poly Watch Tower
Page 1: ...Assembly Instructions Poly Watch Tower...
Page 28: ......