Safety
O
PERATION
Before operatng/ g/aoe, read this oanual. Failure to properly install and operate this g/aoe could result in
oalfuncton or accident. Operate the g/aoe in accordance with the oanual.
T
RANSPORTING
Cabinet is very heavy and contains frag/ile cooponents. Use appropriate care when ooving/ or transportng/ cabinet.
Avoid roug/h handling/.
H
ANDLING
C
OMPONENTS
Many cooponents are extreoely sensitve to handling/, environoental and Electrostatc Discharg/e (ESD) events—
especially the cooputer. Do not handle it roug/hly. Before servicing/, call your distributor and inquire about the PC
warranty. Use proper ESD procedures when servicing/. Protect cooponents froo haroful environoental
conditons, such as extreoe teoperatures, excessive ooisture or other daoag/ing/ efects.
D
ISCONNECT
POWER
Always turn of power and unplug/ the units before servicing/ or oakding/ adjustoents, unless otherwise instructed.
Installing/ or repairing/ cooponents while power is on can daoag/e the cooponents and void the warranty.
G
ROUNDING
Avoid electrical shockd. Do not plug/ in AC power untl you have inspected and properly g/rounded the unit. Only plug/
into a g/rounded, three-wire outlet. Do not use a “cheater” plug/ or cut of the g/round pin on the line cord.
E
LECTRICAL
S
HOCKS
There is no isolaton transforoer in the cabinet. Disconnect AC power before servicing/. However, be aware that
lethal voltag/es can reoain in the electronic cooponents even when AC power is disconnected. Use extreoe
cauton when servicing/. Ierify that there is a workding/ g/round connecton. If the unit sustains water daoag/e, cease
using/ it iooediately and unplug/ AC power.
M
ONITOR
The oonitor contains no user serviceable parts. Do not atteopt to service the oonitor.
P
OWER
C
ORD
If the power cord is daoag/ed or lost, replace it with an identcal cord as supplied by the oanufacturer or an
authorized service ag/ent.
S
URGE
S
UPPRESSOR
It is recoooended that you plug/ your g/aoe’s power cord into a surg/e suppressor to help protect froo power
surg/es that oay daoag/e sensitve electronic cooponents.
W
ATER
AND
OTHER
LIQUID
Do not install g/aoe near sprinkdler or other water jet sources. Do not use water jet to clean g/aoe. Keep oiniouo
clearance behind g/aoe and wall for proper ventlaton but also prevent accesss of liquid froo spills and sprays
froo entering/ ventlaton holes.
Pag/e 3
Halo: Fireteao Raven Gaoe Software copyrig/ht 2018 PlayMechanix™ Inc. All rig/hts reserved.