1 I N I T I A L S T E P S
9
c Calibration/ Orientation of house antenna
If no channel has been found on your normal house antenna, it is likely that it is pointing towards a transmit-
ter which transmits only in analogue.
If your zone is covered by digital transmission (DVB-T zone), it is because the transmissions come from an-
other transmitter, and you will need to modify the orientation of your antenna. We distinguish two cases,
according to which you know or do not know the UHF channel number on which you are supposed to re-
ceive digital transmission.
Case No. 1
You know at least one channel number (between 21 and 69) which transmits in your region.
· Go to
MENU / Scan / Manual Search.
· Click on the VOL+ key until the
UHF Channel
Number
which transmits in digital appears. Wait for a few
seconds and watch the Reception Quality and Signal
Level graphic displays.
· Turn the antenna to maximise the signal. When you
approach the direction of the transmitter, the Level
should rise, then the Quality. A quality of 80% is the
minimum for a stable image. If the Quality never rises,
it is because the channel number you have chosen is incorrect, or transmission is too distant for your direc-
tional antenna.
· Once the maximum level is reached, tighten the fixing screws on the antenna.
· Click on
EXIT.
· Go to
MENU / Scan / Auto Searching
Plawa_06_004_Bedinungsanleitung_4_engl2 10.05.2006 10:09 Uhr Seite 9
