1 I N I T I A L S T E P S
6
a Usage of the CINEMAN.DVB-T
The CINEMAN.DVB-T you have purchased is an ultra-modern, portable television that has been developed to
receive digital, DVB-T standard (digital video broadcasting terrestrial) TV and radio programmes. The DASC
antenna supplied as standard serves as the reception antenna. Any house or room antenna can also be used
to receive digital programmes as they are broadcast in the same frequency range as the analogue programmes
available hitherto.
You can use your CINEMAN.DVB-T in 3 different ways:
1. CINEMAN.DVB-T as a standard television
For home usage, the CINEMAN.DVB-T can be connected to the DASC antenna provided
via the antenna input ANT (IN) or to the house antenna. For CINEMAN.DVB-T usage
with the house antenna, please note that the TV antenna coming from the roof should be
connected directly to the antenna input designated ANT (IN). If the plug on your antenna
cable is too short, use the antenna cable adapter provided. Connect the antenna cable to
the CINEMAN.DVB-T and then connect the device to the mains supply.
2. CINEMAN.DVB-T as a set-top box / digital receiver
You can also use the CINEMAN.DVB-T as a digital receiver / set-
top box. Either connect the DASC antenna to the antenna input
ANT (IN) or connect the device to the house antenna. For
CINEMAN.DVB-T usage with the house antenna, please note that
the television set should be connected to the antenna output ANT
(OUT). The outputs VIDEO OUT and AUDIO OUT should then be
connected to the scart sockets on the television set via the AV cable provided. Connect the CINEMAN.DVB-T
to the mains supply via the adapter. If your television set has no AV inputs, you can use an AV/scart adapter
(not supplied as standard).
Please note that the CINEMAN.DVB-T should not be connected to a cable TV system or to an
antenna with a closed dipole as this will cause damage to the CINEMAN.DVB-T and invalidate
any warranty entitlements!
Plawa_06_004_Bedinungsanleitung_4_engl2 10.05.2006 10:09 Uhr Seite 6
